[Public-list] Prop Nut Clearance

[Mike Lehman]

The only way to find out, is to try it.



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: richard.hazlegrove at wachovia.com
Reply-To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
To: public-list at alberg30.org
Subject: [Public-list] Prop Nut Clearance
Date: Thu, 21 Apr 2005 08:45:29 -0400

Thanks Mike for the response.  Actually Quest has a three bladed prop.
Based on what you said, it sounds like at least the prop nut and zinc will
clear the rudder and in my case allow the shaft to move aft until the
trailing  edge of one of the blades hits the rudder.  From memory that may
still get me at lease a couple of additional inches of movement which may
be enough.  Any thoughts?
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list



 1114091001.0