[Public-list] Re: Great News - Toggles

[Brian and Elaine Timmins]

An elegant choice from an elegant engineer!
I wasn't happy grinding away as much as i did to make the angle look reasonable. Then when Chris suggested more, I looked at the sail plan and sort of agreed. As to Gord's comment, I understand about not overheating the parts. The only part that overheated was the sliver I cut off. The scratches are from removing the burr with less than the perfect tool. I would have polished them before actually giving them back, but wasn't going to polish until I knew I didn't need to cut more. Now they're just spares, so if you want them polished, it's up to you.
Brian
  ----- Original Message ----- 
  From: sousa, stephen (ENG) 
  To: 'greeksailor at att.net' ; alberg30sail497 at yahoo.com ; timmins at optonline.net 
  Sent: Thursday, April 21, 2005 2:11 PM
  Subject: RE: Great News


  Chris,

  It was my error in choosing the toggle from Schaefer. The toggles I picked up today are heavier and definitely fit the mast head. As Brian would say it was my boo boo, not anyone else. 

  When I looked at the photo's last night, I couldn't see using parts modified as such at sea on my boat. Therefore, I would not let it go on your boat.

  I would expect that you will like these toggles, let me know. 

  Stephen



------------------------------------------------------------------------------
  From: greeksailor at att.net [mailto:greeksailor at att.net] 
  Sent: Thursday, April 21, 2005 12:30 PM
  To: sousa_stephen at emc.com; alberg30sail497 at yahoo.com; timmins at optonline.net
  Subject: Great News


  Stephen,

  You can tell me what's behind all this ;) I wont tell anyone. It better not be out of your pocket expense.

  Chris

 1114119032.0