[Public-list] Original gatevalve sizes

[Mike Lehman]

A Sawzall and the 'ole sledge-o-matic is THE only way to remove thru-hull 
fittings. I can do a whole boat in under an hour.



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: George Dinwiddie <gdinwiddie at alberg30.org>
Reply-To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
Subject: Re: [Public-list] Original gatevalve sizes
Date: Mon, 04 Apr 2005 22:39:25 -0400

John Birch wrote:
>Plus there are machine roll/round cut threads and sharp cut threads - you 
>need threads that match both male and female - best to buy from the same 
>supplier.
>Did all out through hulls a while ago - Crittenden won't fit with Grocco, 
>etc.
>Tapered with straight and on and on ...
>Always a joy like Whitworth with Imperial or Imperial with Metric or Metric 
>with Whitworth - such fun.
>Is plot me thinks ; )

All you gotta do is put Mike Lehman on the wrench.  It'll go on.  He's even 
better at removal.  Sawzall and sledge.


--
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                                             'The Middle' by Ogden Nash
  ----------------------------------------------------------------------



_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list



 1112703448.0