[Public-list] Toggles

[sousa, stephen (ENG)]

The toggles with clevis pins are shipping out via UPS this evening. I must
quote Brian "this was my boo boo in providing the toggle part number from
Schaefer". These parts are much heavier than Schaefer and will provide a
stronger rig. Concerning Chris and Richard in Canada, I know you will see
some duty charge. Value assigned is $10.00 for these parts and shipped as
engineering samples.

Best regards,
Stephen 

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Gordon Laco
Sent: Thursday, April 21, 2005 11:24 AM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Toggles

Hi Guys - 

Stephen's offer is a valuable one.   I the ground ones in the earlier pics
are going to be used you would want to carefully polish off the scratches in
order to prevent promotion of crevice corrosion.  Also - you have to be
careful not to let them get hot while grinding and polishing.  If that
happens the temper of the metal changes and the manufacturer's strength
specs go out the window.

Gord #426 Surprise




> Gents,
> 
> One set of toggles and pins will be shipping to all those who purchased
Mast
> Heads. These toggles fit the mast head and cure the problems you are
having.
> 
> Regards,
> Stephen
> 
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list

_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1114107743.0