[Public-list] Opening Ports - V berth

[Gordon Laco]

Hello fellows - 

I hope I am not transgressing on list rules by reminding my fellow sailors
that I have opening ports and offer a discount to A30 owners...

Gordon Laco #426 Surprise






> If opening ports similar to the original ones can be found, there would
> undoubtedly be enough interest among A30 owners to do a substantial group
> purchase. Personally, I could use 4 of them.
> 
> Jay Davenport
> Revolution, #526 
> 
> "sousa, stephen (ENG)" <sousa_stephen at emc.com> wrote:
> Give New Found Metals a call in Port Townsend, WA, Richard should be able to
> help.
> 
> Stephen 
> 
> -----Original Message-----
> From: public-list-bounces at alberg30.org
> [mailto:public-list-bounces at alberg30.org] On Behalf Of James Schueler
> Sent: Tuesday, August 09, 2005 2:07 PM
> To: 'Alberg 30 Public List -- open to all'
> Subject: RE: [Public-list] Opening Ports - V berth
> 
> David,
> 
> I don't know but I'm looking too. After this summer, when it was hotter
> than you know what in the cabin, despite the tarps I hung over the deck
> to keep the sun off, I'm considering ports that open. I've also toyed
> with the idea of replacing the cabin ports with an entirely different
> type. If anyone has any ideas I'd like to hear them.
> 
> James Schueler
> 'Oddyseus' #170
> 
> -----Original Message-----
> From: public-list-bounces at alberg30.org
> [mailto:public-list-bounces at alberg30.org] On Behalf Of Dave Terrell
> Sent: Tuesday, August 09, 2005 1:12 PM
> To: public-list at alberg30.org
> Subject: [Public-list] Opening Ports - V berth
> 
> Does anyone know if it is possible to get opening ports ( like the one
> in the head) for the v-berth? My desire is to purchase something that
> would just fit in. I would like to avoid cutting old fiberglass or
> building up new fiberglass. That probably means going to the original
> source if they are still in business. I would like to improve the
> ventalation in the v-berth and think that this would work. If not, maybe
> making a custom screen for the hatch is the only reasonable option.
> 
> Thanks for anything anyone can contribute.
> 
> David- Talisman (432)
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list


 1123614408.0