[Public-list] Boot Stripe Height

[sousa, stephen (ENG)]

Roger,

When do you need this information? The boot stripe on 114 is above the
water, loaded with water, fuel and provisions. Empty she is above the water
by 3 inches.

Stephen  

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Roger L Kingsland
Sent: Tuesday, August 02, 2005 10:34 AM
To: Alberg 30 Public List -- open to all
Subject: [Public-list] Boot Stripe Height

Stephen,

A question RE the boot stripe.  I found the original boot stripe lines
scribed in the hull which are definitely lower than the one I removed.  The
section at the stern is about 10" wide.  Because I want to emphasize
freeboard height (to me, the after cabin height relative to the freeboard
amidships is a little tall) I would like to locate the new boot stripe as
low as possible but, is sounds like it will be underwater if I use the
original location.  Dose anyone know how much higher I need to place it so
the entire stripe is out of the water when the boat is "at rest?"  I know it
depends on how much junk is on board but I abandoned plans for the onboard
Jacuzzi so I think she will be loaded only slightly more than one of those
hot shot racing boats.

Roger


Roger Kingsland
Managing Partner
KSBA Architects
N40°- 27.83'  W79°- 57.99'

(412) 252-1500 x101 office
(412) 779-5101 cell
----- Original Message ----- 
From: "sousa, stephen (ENG)" <sousa_stephen at emc.com>
To: "'Alberg 30 Public List -- open to all'" <public-list at alberg30.org>
Sent: Monday, August 01, 2005 9:34 PM
Subject: RE: [Public-list] paint


> Dan,
>
> To answer your question no. Many Alberg owners have raised the boot stripe
> so the water doesn't effect it.
>
> Stephen
>
> -----Original Message-----
> From: public-list-bounces at alberg30.org
> [mailto:public-list-bounces at alberg30.org] On Behalf Of dan walker
> Sent: Monday, August 01, 2005 9:28 PM
> To: Alberg 30 Public List -- open to all
> Subject: [Public-list] paint
>
> painting gurus
> is it a horrible thing if i sand my bootstripe, not completely, fill the
> spots where the barnacles caused the paint to peel completely with west
> epoxy(with beads for thickener) then smooth.then put on brightsides.
> does this question even make since
> dan
> call me forrest
> rascal 145
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
>


_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1123117245.0