[Public-list] Port light installation on older Alberg

[Coolray]

A30s,
What have you folks done in the past if the frames are
beyond salvage? The repair page I read (very helpful
and explicit) assumed good frames. 

John Cooler
Atalaya

--- Dave Terrell <DTERRELL at message.nmc.edu> wrote:

> There are step by step instructions with pictures on
> our website. The pictures can be blown up and the
> whole thing printed out.  It is not too hard. It can
> be done by a single person but having a helper makes
> things a lot easier. I suspect George or someone
> can/will give the exact address for the
> instructions.
> 
> 
> >>> i_hoffman at hotmail.com 08/15/05 10:30 AM >>>
> 
> 
> I am in the process of reinstalling new port lights.
>  I have an older Alberg 
> (#26) with the small locking gasket type portlights.
> The lexan is cut and I have the rubber gasket.  I
> have been attempting to 
> install and have not found this to be easy.  Seems
> you need 8 arms and a 
> gallon of dishsoap to install.  If anyone has any
> advice or would like to be 
> paid generously to install these SOON, I would
> appreciate a response.
> Thanks, Irene Moffatt
> 
> Mystique #26.
> i_hoffman at hotmail.com 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html 
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org 
> http://alberg30.org/mailman/listinfo/public-list 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
> 



		
____________________________________________________
Start your day with Yahoo! - make it your home page 
http://www.yahoo.com/r/hs 
 

 1124132356.0