[Public-list] Mast Head Replacement and stuff

[sousa, stephen (ENG)]

John,

I thought you had the clutch type winch otherwise total wire wouldn't work.
As Gord stated, my friends first mate almost broke her thumb due to lack of
experience with that type of winch.

As a note concerning replacement mast heads, everyone has options in
maintaining their boats. The original set up on the Alberg in my case, 1965
was a cast aluminum head with minimal meat which attaches to the mast. Also
I found when trying to install new rigging the swaged eye fitting would not
fit into the mast head pocket. The sheave in the middle of the mast had to
be replaced since it was chewed up for the previous years of sailing.

With the aforementioned issues on the table, it was time to design and
purchase a replacement mast head. The Alberg owners that have purchased
these mast heads are extremely happy and I am sure the 11 people that are in
this group purchase will also be satisfied. 

I also found that the mast step stainless plate which bolted to the aluminum
plate had elongated holes and stress cracks when rebeding the step. The
replacement step has been modified and made into a single unit without any
adjustment points, I never adjusted the mast step over the years. 

I guess the bottom line, if you don't look at materials on the boat, the
owner can wait until they fail and then replace the broken parts.

Stephen
#114   
-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of 5thseason at canada.com
Sent: Friday, February 25, 2005 9:32 AM
To: public-list at alberg30.org
Subject: RE: [Public-list] Mast Head Replacement

On Thu, 24 Feb 2005 10:07:20 -0500, "sousa, stephen
(ENG)" wrote:
Stephen
On my boat I have 3 Austrailian (Barlow and no longer
available) wire rope winches.  These came with the boat
.  Two of these were used for the main sail furling
when I had it and the 3rd as a headsail furling line
winch.  Each one has a clamping type clutch to hold the
wire taught when the sail is hoisted.
John Boor
MAHSEER
#380
> 
> John,
> 
> How do you secure the wire when you have raised the
> sails? I am aware of
> some boats not Albergs, that have a winch which will
> wrap wire and have a
> clutch to control dropping the sails.
> 
> Stephen
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1109343479.0