[Public-list] Zincs

[5thseason at canada.com]

On Thu, 3 Feb 2005 17:14:23 -0000, "Peter Amos" wrote:
Peter
Why are you connecting all of your through hulls to the
zinc.  If the are all isolated and of the same material
how much reaction will there be.  Also unless you have
a rubber damper on the prop shaft is it not connected
to the zinc via the engine block, plus if you do have
an isolater would not a copper bridge solve the problem.
John Boor
MAHSEER #380
> 
> I shall be fitting a large external zinc to the hull
> this month and running connecting wires to various
> fittings (through hulls) insde the hull.
> I would also like to run a connection to the shaft
> using a pair of alternator type brushes.Has anybody
> done this?I have seen a marine type gadget that would
> do the job but it is very expensive.
> Peter Amos
> Tait Tait 478

 1107525885.0