[Public-list] Mast Fairing Blocks

[Mike Lehman]

Dave

Sorry - I presume that since you we installing a winch, that you want a 
round piece of wood. That is the circle from the block.
Mike Lehman
 ~~~_/)_/)~~_/)~~~


----- Original Message ----- 
From: "Dave Terrell" <DTERRELL at message.nmc.edu>
To: <public-list at alberg30.org>
Sent: Friday, February 18, 2005 4:27 PM
Subject: RE: [Public-list] Mast Fairing Blocks


> I understand everything but "cut out hte circle". What circle>
>
> I have another queston too. Some time ago there was a diiscussion about
> putting an access port into the fresh water tank by placing one in the
> sort of "triangular" wooden space between the two bunks in the v-berth.
> The discussion was about preliner boats. My question: Can this be done
> with a liner boat as well. I am asking you because you have a liner
> boat.
>
> Thanks.
>
> >>> sail_505 at hotmail.com 2/18/2005 4:07:28 PM >>>
> If you have a square block; then I would trace the curve onto the edge
> of
> the block; then cut it using a bandsaw; then cut out the circle.
>
>
>
> Mike Lehman
> ~~~_/)_/)~~_/)~~~
>
>
>
>
> ----Original Message Follows----
> From: "Dave Terrell" <DTERRELL at message.nmc.edu>
> Reply-To: Alberg 30 Public List -- open to all
> <public-list at alberg30.org>
> To: <public-list at alberg30.org>
> Subject: [Public-list] Mast Fairing Blocks
> Date: Fri, 18 Feb 2005 15:25:59 -0500
>
> I want to make some mast fairing blocks for the winch and the
> footblocks. I have the teak, an accurate template, and understand that
> I need to use the template to mark the line that needs to cut.
>
> My question: what sort of tool does one use to cut the wood - and how
> does one do it so it is accurate and will fit the mast? The curvature
> of
> the line to be cut is the problem.
>
> Thanks.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
> 

 1108779925.0