[Public-list] Tiller Head Fitting

George Dinwiddie gdinwiddie at alberg30.org
Tue Jan 11 14:31:43 PST 2005


You can see the Edson tiller head on 
http://www.alberg30.org/maintenance/Steering/TillerHead.html

sousa, stephen (ENG) wrote:
> Jim,
> 
> If you cannot have the current one bronze welded, Edson Marine sells the
> tiller cap and strap as a unit. I had to drill and tap the hole that accepts
> the centering pin for the cap. But the unit does fit our boats with a little
> rework.
> 
> Stephen
> #114 
> 
> -----Original Message-----
> From: public-list-bounces at alberg30.org
> [mailto:public-list-bounces at alberg30.org] On Behalf Of James Schueler
> Sent: Tuesday, January 11, 2005 2:08 PM
> To: public-list at alberg30.org
> Subject: [Public-list] Tiller Head Fitting
> 
> Hello all.
>  
> The bracket that attaches the tiller to the rudder post on my Alberg has
> a crack in it. Should I have it welded, if that can be done, or is it
> possible to have another one fabricated? Or is there another solution
> that I haven't thought of?

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                                             'The Middle' by Ogden Nash
  ----------------------------------------------------------------------




 1105482703.0


More information about the Public-List mailing list