[Public-list] Genoa track spacers & bolts

[Brian and Elaine Timmins]

1/4-20X4 StSt Machine screws, 0.33 ea.
http://www.jamestowndistributors.com/product;part;7333;process;search;ID;,Fasteners,Screws.Bolts,Machine.Screws,Stainless.Steel,Flat.Head.Phillips,1.4.20

----- Original Message ----- 
From: "Amy & David Swanson" <zira at bellsouth.net>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Wednesday, July 27, 2005 10:05 PM
Subject: [Public-list] Genoa track spacers & bolts


> All -
>
> Went sailing Saturday, and discovered that the wooden spacer under the
port
> genoa track had cracked.  I have previously replaced the spacer under the
> sail track on the mast using some pre-cut (meaning $$$) teak from West
> Marine, but was thinking of using Delrin or similar for this project.
What
> have others used?  Also, how did you shape it to curve with the toe rail,
by
> removing & tracing the track itself, then cutting it out?  That seems
> wasteful of some fairly pricey material.  Finally, does anyone know a good
> source for the 1/4-20 4" flathead machine screws?  No one local to me has
> them, and McMaster-Carr wants $55 + shipping for a box of 10.
>
> Thanks for any/all help.
>
> David Swanson
> Strayaway Child
> Alberg 30 #229
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list


 1122541687.0