[Public-list] Tiller Bolt

[James Schueler]

Thanks Stephen, I'll try them.

James

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of sousa, stephen
(ENG)
Sent: Thursday, June 16, 2005 10:17 AM
To: 'Alberg 30 Public List -- open to all'
Subject: RE: [Public-list] Tiller Bolt

James,

I would give Jamestown Dist. a call in Bristol, RI  800-423-0030 they
may
have that size or can order it for you.

Stephen 

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of James Schueler
Sent: Thursday, June 16, 2005 10:15 AM
To: 'Alberg 30 Public List -- open to all'
Subject: RE: [Public-list] Tiller Bolt

Stephen,

That's great but where can I buy one? I looked in the West Marine
catalog and it appears that they don't have the diameter I need. The
local hardware store doesn't stock anything in silicone bronze so I
would need to but 25 when I only need one. I just need the bolt and then
I'll grind it as you did.

James

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of sousa, stephen
(ENG)
Sent: Thursday, June 16, 2005 10:03 AM
To: 'Alberg 30 Public List -- open to all'
Subject: RE: [Public-list] Tiller Bolt

Jim,

Either you can have a machine shop duplicate or I made one from a 1/2"
silicone bronze bolt and round the end with a grinder. It worked since
the
bronze is so soft.

Stephen 

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of James Schueler
Sent: Thursday, June 16, 2005 9:58 AM
To: public-list at alberg30.org
Subject: [Public-list] Tiller Bolt

Hello everyone. 
 
I need to replace the bolt (set screw) that attaches the tiller head
fitting to the rudder shaft as it comes into the cockpit. The bolt is
silicone bronze, an inch long, and I believe ½" in diameter. The end of
the bolt is rounded to allow it to sit in the recession in the rudder
shaft. 
Anyone know where I can find it or something close to it?
 
Thanks,
 
James Schueler
'Oddyseus' #170

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
 
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
 

_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
 


 1118932631.0