[Public-list] Tiller Bolt

[sousa, stephen (ENG)]

Jim,

Either you can have a machine shop duplicate or I made one from a 1/2"
silicone bronze bolt and round the end with a grinder. It worked since the
bronze is so soft.

Stephen 

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of James Schueler
Sent: Thursday, June 16, 2005 9:58 AM
To: public-list at alberg30.org
Subject: [Public-list] Tiller Bolt

Hello everyone. 
 
I need to replace the bolt (set screw) that attaches the tiller head
fitting to the rudder shaft as it comes into the cockpit. The bolt is
silicone bronze, an inch long, and I believe ½" in diameter. The end of
the bolt is rounded to allow it to sit in the recession in the rudder
shaft. 
Anyone know where I can find it or something close to it?
 
Thanks,
 
James Schueler
'Oddyseus' #170

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
 
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1118930569.0