[Public-list] Atomic 4 Water Pump bolts/Extender bolt

[5thseason at canada.com]

On Fri, 27 May 2005 11:54:12 -0300, Bob Crinion wrote:

> Hi all
What I have is a standard 4 1/2 in bolt with about 1
1/2 in of thread and one nut tightened down at the end
of the thread.
John Boor
MAHSEER #380
> Hi All,
> 
> Have you ever tried to remove your Atomic 4 water
pump?
> 
> Remember how much fun it is to remove the lower bolt?
> 
> I have made up extender bolts for the lower water pump
> bolt from SS 3/8"
> threaded rod, 4 1/4" long. Add (4) 3/8" nuts, double
> "nutted" at 2 locations
> on the threaded rod, and you have an extender bolt.
> Inexpensive too!
> 
> Substitute extender bolt for the lower bolt in water
> pump and it makes it
> easier to service the water pump.
> 
> It works on  Jabsco and Oberdorfer pumps.
> 
> 
> Bob
> A30 KC 560
> 
> 
> 
> 
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list

 1117459605.0