[Public-list] Opening Vents in the V-berth

[sousa, stephen (ENG)]

Dave,

Does the pricing provide parts for a group purchase, or has Chris considered
this in his numbers. I may buy four and change out the 2 from 1965 and
install two others for better air flow.

Thanks,
Stephen 

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Dave Terrell
Sent: Thursday, November 03, 2005 2:09 PM
To: public-list at alberg30.org
Subject: [Public-list] Opening Vents in the V-berth

I can now report to anyone who is interested that in the opening ports from
Whitewater Marine Hardware (1-800-572-8871) that they fit just fine in the
hole Whitby used. Neither cutting nor fiberglassing is required. Maybe a
little putty at the most. I dry fitted one yesterday and all went well. The
fore and aft screw holes on the trim right lined up almost perfectly with
the holes on the WWMH trim ring. There may some merit in creating an inner
spacer - because the width of the cabin wall is 3/8 " - I understand that
doing this will strengthen the instalation. I  am pretty sure is is easy to
do.

 If you call them, asks for Curtis.

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1131045990.0