[Public-list] 4200 or 5200

[Mike Lehman]

5200 is okay to be used below the water line.



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: Don Campbell <dk.campbell at sympatico.ca>
Reply-To: dk.campbell at sympatico.ca,Alberg 30 Public List -- open to all 
<public-list at alberg30.org>
To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
Subject: Re: [Public-list] 4200 or 5200
Date: Fri, 04 Nov 2005 19:52:53 -0500

Patty:
Check with 3M for a couple of things including UV stability.  For some
reason,  I seem to remember it said that 5200 should not be used below
the waterline. It is not easy to get rid of it for sure. So if you
cannot get at it with a cutter of some sort, and a grinder/sander to
finish things off, using 5200 on the hull to deck joint might be too
agressive. If the use is just to bond the toe rail t  the deck,  I would
not use 5200 because the toe rail might be damaged for a local area and
even replacing and joining to that area would be difficult.
Don

Patty J wrote:

 > What is the consensus on using 4200 vs 5200 on toe rail?
 >
 > Patty
 >
 > _______________________________________________
 > These businesses support your Association:
 > http://www.alberg30.org/store/A30supporters.html
 > Please support them.
 > _______________________________________________
 > Public-list mailing list
 > Public-list at alberg30.org
 > http://alberg30.org/mailman/listinfo/public-list

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/


 1131374891.0