[Public-list] Bilge

[JohnI]

It sounds like rotten plywood under there. If it were my boat, I'd take it
all out and replace it.
 If you decide to do that, please take photos of the bilge and top of the
ballast and post them. I'm curious to see what, if anything is covering the
ballast.
 John
#284

 On 11/7/05, James Schueler <jschueler at familyempowerment.org> wrote:
>
> Hello everyone.
>
> Would anyone have any idea why the bottom of my bilge is coming apart? I
> pulled the boat out on Saturday and had it brought to the house Sunday
> morning. As I started cleaning the bilge, large sections (2" x 3") of
> the bilge floor were loose and came up when I vacuumed the small amount
> of water that remained. It would be easy enough to lay some fiberglass
> in there, although nothing is too easy when working in that area, but is
> that the best solution? Any help and advice would be appreciated.
>
> Just for the record, and on another note, I have #170 which is my boat,
> and #177 which belongs to a friend, sitting side by side in the
> backyard. Quite a site in the middle of the farm lands.
>
> Thanks,
>
> James Schueler
> #170 'Oddyseus'
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.362 / Virus Database: 267.12.8/162 - Release Date:
> 11/5/2005
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>

 1131396285.0