[Public-list] New Owner Questions

[JohnI]

John,
 I'm assuming you applied the epoxy directly on to the teak. What kind of
preparation did you do to the teak? How many coats of epoxy did you use? Has
there been any indication that the epoxy had problems bonding to the teak?
How many coats of varnish do you need to protect the epoxy from UV
degradation? Thanks.
 This is an approach I haven't seen before. I did some significant research
on exterior teak refinishing a few months ago and was unable to pinpoint a
solution for my needs.
 John #284

 On 11/8/05, John Boor <5thseason at canada.com> wrote:
>
> > My last is varnish over correctly
> applied epoxy this has given me a good solid base to apply
> the varnish to and I have found that the finish is as sooth
> as silk and after a light sanding with 180 grid new varnish
> brings back the finish. I do this each spring and takes no
> more than an hour. I do not like the orange finish Cetol
> give and refuse to use this on my boat.
>
> John Boor
> MAHSEER #380
>

 1131467349.0