[Public-list] New Owner Questions

[Pete]

On Wednesday 09 November 2005 07:03 pm, FINNUS505 at aol.com wrote:
Have any of you tried mixing the varnish with the epoxy.  It is reputed to 
work.

Pete H.


> In a message dated 11/9/2005 10:02:44 AM Eastern Standard Time,  5thseaso
> n at canada.com writes:
>
> has  built in U.V
> protection.  However I later found out the  epox
>
>
> I applied 1 coat of West system epoxy
> then varnish.
>
> Hi John,
>
> I too have been experimenting with Epoxy as an alternative bright  finish.
>
> Question; why cover the epoxy with varnish, if you use the epoxy that has a
> UV barrier in it?
>
> Last year, I used two coats of regular epoxy covered with three coats of
> varnish on three of my hatches. It has stood up well on all, but for one
> area on one of the cockpit locker covers. I suspect I did not clean the wax
> off the epoxy before applying the varnish in that one spot.
>
> Looking forward to your thoughts,
> Lee
> Stargazer #255
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list

 1131591272.0