[Public-list] Table

[Elaine and Brian Timmins]

Pete,
  Just to confirm the table size, you can get the width and height from your 
own boat. I noticed in your pictures that under your foredeck, you have the 
wooden bracket on the forward bulkhead that is used to store the table. The 
dimension for the thickness of the fiddle on the table is just less than the 
space between the cross piece and the under side of the deck. I think the 
same picture also shows the barrel bolt that secures the table in place. The 
dimension of the width of the table is the dimension between the forward 
side of the barrel bolt and the forward bulkhead. You can also get the 
maximum length of the table by measuring the space available athwartship in 
that area. One thing to watch for is that the under side of the deck is 
probably slightly curved, which will limit the maximum non- curved table 
that will fit.
Good Luck,
Brian  ex#497
----- Original Message ----- 
From: "Peter Staehling" <staehpj1 at yahoo.com>
To: <pdhowa30 at verizon.net>; "Alberg 30 Public List -- open to all" 
<public-list at alberg30.org>
Sent: Thursday, November 10, 2005 7:15 AM
Subject: [Public-list] Table


>I didn't get any response about the table dimensions.
> I found a picture on the associations site that will
> let me approximate them, but would still be interested
> in knowing what the original dimensions were.
>
> Do you guys use the table as it was originally
> designed?  Some other table arrangement?  No table?
>
> Pete
>
>
>
> __________________________________
> Yahoo! FareChase: Search multiple travel sites in one click.
> http://farechase.yahoo.com
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list 


 1131705127.0