[Public-list] freshwater tank question

John Birch Sunstone at cogeco.ca
Tue Nov 29 12:16:19 PST 2005


When we did ours we used a Freud brand Plug cutter bit and inserted new 
plugs when done - you will need to do both inside and outside hand rails as 
they are bolted through. Drill carefully with the plug cutter so as to not 
hit the bolt and wreck the bit. Do not be tempted to use a drill bit as you 
will be unable to use the Freud bit afterwards to properly do the hole.

When recaulking, suggest only caulking the outer rail so that if there is a 
leak you can see the water coming through the deck.

When finished suggest using teak plugs and either using a chisel cutting 
crosswise in the direction of the up grain to remove the excess wood or else 
a plug saw - prefer the chisel.

Hope this is helpful.

Cheers,
John
----- Original Message ----- 
From: "Peter Staehling" <staehpj1 at yahoo.com>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Tuesday, November 29, 2005 3:02 PM
Subject: RE: [Public-list] freshwater tank question


> Speaking of the plugs...
> Is there an easy way to get them outwith damage to
> surrounding wood?
>
> I want to take the hand rails off to refinish the
> outside ones and rebed them.  I am unsure how best to
> remove the plugs.  I am guessing that there is a
> embedded nut on one side and a machine screw on the
> other.  Anyone know if this is correct and if so which
> side (top ot bottom) has the screw?  It would be nice
> to leave the plugs intact on one side if possible.
>
> Pete
> #554
>
> --- Dave Terrell <DTERRELL at message.nmc.edu> wrote:
>
>> Yes, you were one of several who wrote on this
>> topic. I think I found
>> all the plugs - there were 4 more than one of the
>> reports in the manual.
>
>
>
> __________________________________
> Yahoo! Music Unlimited
> Access over 1 million songs. Try it free.
> http://music.yahoo.com/unlimited/
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list 


 1133295379.0


More information about the Public-List mailing list