[Public-list] fiberglassing

sousa, stephen (ENG) sousa_stephen at emc.com
Sun Oct 2 17:16:29 PDT 2005


Patty,

I would put some type of backing plate either wood (marine ply or metal), we
found the same with the cleats on deck which now have metal backing plates.

Stephen
#114  

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of
dickdurk at atlanticbb.net
Sent: Sunday, October 02, 2005 8:11 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] fiberglassing


>I haven't looked
>to see if they have a backing plate. Does anyone know the >answer to
>this? 

Whitby wasn't real big on backing plates. Mine are thru 
bolted to the flange of the deck/hull joint with washers 
under the nuts.

Can you just fill in the holes with thickened resin and 
'glass strands? Resin does shrink some as part of it's 
curing process, so several applications will insure water 
tightness.

Anyway, fill it, grind it, paint it. good as new. Ain't 
plastic wonderful?

Michael Grosh
#220

On Sun, 2 Oct 2005 17:12:24 -0500
  Timbuktu5555 at webtv.net (Patty J) wrote:
> Thanks for all the advice.  After reading and hearing 
>from everyone thus
> far, I have decided on using polyester resin, mat (1/2 
>oz) and cloth (10
> oz) and applying PVA to seal the air inhibited resin or 
>perhaps a
> finishing resin.  This is for the repair to the 
>hull-deck joint.
> 
> Now, for the stantions that pushed through the deck...I 
>haven't looked
> to see if they have a backing plate.  Does anyone know 
>the answer to
> this?  A friend of mine told me I should put a block of 
>wood under the
> stantion to make it an easier repair but I would have to 
>do this to
> every stantion to make it look right and I don't like 
>the idea of
> changing the boat like that.
> 
> Patty
> Timbuktu is gonna rise from the ashes...hey, perhaps I 
>should rename her
> Phoenix! 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1128298589.0


More information about the Public-List mailing list