[Public-list] fiberglassing

[Philip Bartlett]

Patty,
Windward has aluminum backing plates but they may have been a retrofit. Seem 
to work well.

Philip

----- Original Message ----- 
From: "Patty J" <Timbuktu5555 at webtv.net>
To: <public-list at alberg30.org>
Sent: Sunday, October 02, 2005 3:12 PM
Subject: [Public-list] fiberglassing


> Thanks for all the advice.  After reading and hearing from everyone thus
> far, I have decided on using polyester resin, mat (1/2 oz) and cloth (10
> oz) and applying PVA to seal the air inhibited resin or perhaps a
> finishing resin.  This is for the repair to the hull-deck joint.
>
> Now, for the stantions that pushed through the deck...I haven't looked
> to see if they have a backing plate.  Does anyone know the answer to
> this?  A friend of mine told me I should put a block of wood under the
> stantion to make it an easier repair but I would have to do this to
> every stantion to make it look right and I don't like the idea of
> changing the boat like that.
>
> Patty
> Timbuktu is gonna rise from the ashes...hey, perhaps I should rename her
> Phoenix!
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
> 



 1128482471.0