[Public-list] window replacement sealant

[John Boor]

> I also had a problem keeping the goop off the cabin sides
on one window.  I solved this problem by not touching the
5200 as it squezzed out arround the frame I left it until it
had setup the next day when I cut it away with a sharp xacto
knife. I also used this method on any sealing I do on the
boat.

John Boor
MAHSEER #380
> 
> A slick technique to avoid getting sealant on the new
> Plexiglas is described but there is no mention of keeping
> goop off the inside and outside of the cabin.  I assume it
> is desirable to tape off these areas but also wonder if
> there are good sealants that can be easily removed with a
> solvent that doesn't damage paint?  I can't even pour a
> cup of coffee without spilling and anticipate substantial
> clean up will be necessary if I am doing the job.
> 
> Thanks,
> 
> Roger
> 
> Roger Kingsland
> Chief Boat Boy, Rubber/Scraper and Check Writer
> Alberg 30 #148, PERFECT intentions
> N40-33.92, W79-51.25
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list

 1128521429.0