[Public-list] Cockpit coamings

[Mike Lehman]

Note: the 1/4 round moulding was standard on the older boats and did not 
come one the newer boats.



Mike Lehman
~~~_/)_/)~~_/)~~~




----Original Message Follows----
From: "Alan Slater" <alanslater at telus.net>
Reply-To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Subject: Re: [Public-list] Cockpit coamings
Date: Thu, 13 Oct 2005 20:21:40 -0700

Ed
On reinstalling the coamings I applied a sticky backed, closed cell,
neoprene foam gasket to the fiberglass. This way I can remove them easily
next time for refinnishing. The thickness is maybe less than 1/8" thick and
comes in sheets 36" wide. I covered the whole area of fiberglass that
supports the coamings, and trimmed it with a sharp knife at the deck and
around the winch supports. My boat did not come with the quarter round
moulding you describe, it may have been an add on, as you say, to give extra
sealing.

Alan Slater
Romp  #358



--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.14/131 - Release Date: 10/12/2005

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/


 1129295496.0