[Public-list] Engine Question

[sousa, stephen (ENG)]

Jon,

I have the same installation in #114. They made Z-Brackets which the motor
mounts are mounted. Which Yanmar are you installing in the Alberg? You
should verify that they are providing a new propeller with the installation,
the Campbell which is a 12 or 13 X 7 pitch will not work well with the
Yanmar.  

Stephen

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Jon Budington
Sent: Monday, September 19, 2005 2:28 PM
To: Alberg 30 Public List -- open to all
Subject: [Public-list] Engine Question


I am in the process of replacing my Gray Marine with a new Yanmar.  The work
is being done by a local engine service company in Annapolis.  I went to
check on the progress of the job this weekend and was surprised to see the
new engine laying on the old Gray beds.  The new engine is narrower, and the
mounts do not line up.  To compensate, the mechanic manufactured plates to
bolt to the old beds - the new engine mounts are bolted to the plates.  Does
this sound correct?

Thanks,

Jon Budington
Nimble #67

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1127155368.0