[Public-list] Emergency Request for help with apart!!!!!!!!!! !!!!!!!!!!!!!! :(

Meinhold, Michael J MICHAEL.J.MEINHOLD at saic.com
Fri Sep 23 09:30:28 PDT 2005


I liked the part where somebody was about to take a bite of lunch and got a
wave down his neck!

Mike
#272

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org]On Behalf Of Bob Crinion
Sent: Friday, September 23, 2005 12:09 PM
To: 'Alberg 30 Public List -- open to all'
Subject: RE: [Public-list] Emergency Request for help with
apart!!!!!!!!!!!!!!!!!!!!!!!! :(


Hey Gord,

Did you get to see that Alberg video on your MAC?

That was a good video; I enjoyed the sound effects too...

I'll have to burn that to a DVD to show friends at home.

It would be fun to see more video footage of the Alberg 30's sailing.
I especially like the part where the sailors are casually eating lunch, as
if it was a calm day sail.  No problem!


-bob
#560

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Gordon Laco
Sent: Friday, September 23, 2005 12:51 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Emergency Request for help with
apart!!!!!!!!!!!!!!!!!!!!!!!! :(



I knew a fellow when I was a boy whose parents took the tiller away from
their boat so that he could not take it out without permission (I thought he
was amusing then, now that I am a father I shudder to think what sort of
child would drive parents to resort to such a thing...)  Undaunted, he
snapped a  large set of Vice Grips to the shaft and went on several late
night expeditions in the boat.

Gord #426 Surprise






>>> Remember you drill out the thickest part of the shaft
> making it even weaker.
> 
> John Boor
> I do not recomend this proceedure.  I did this 3 years
>> ago and have had second thoughts since.  If you think
>> about it the shaft is 3/4in dia and you drill 1/3rd of
>> this dia away leaving 1/4in either side for strength, I
>> worry about twisting under heavy weather loading to this
>> day. I wished I had not done this but had a new one
>> machined with the correct slot position.
>> 
>> Food for thought
>> 
>> John Boor
>> MAHSEER #380
>>> So I put the fitting on straight, without the key in the
>>> keyway, and drilled all the way thru for a 1/4-20 bolt
>>> and nut, that prevents twisting of the fitting. So as
>>> not to be too far crooked while drilling, I went 1/2 way
>>> from each side. The holes met less than 1/64th apart. It
>>> has been working now all season. I get a little
>>> squeaking but very little play.  Ed. Schroeder
>>> 
>>> FINNUS505 at aol.com wrote:
>>> Hey,
>>> 
>>> The dreaded play in the tiller............. I took the
>>> rudder post head  fittings apart to find the rudder post
>>> cap has two cracks in it, which explained  why
>>> tightening the fastening bolts did not eliminate the
>>> play. The cracks are  about 1/8" long, extending
>>> verticaly up from the bottom of the cap sleeve
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-list mailing list
>> Public-list at alberg30.org
>> http://alberg30.org/mailman/listinfo/public-list
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1127493028.0


More information about the Public-List mailing list