[Public-list] Varnish Removal ?

[dan walker]

brian, 
  sorry i took so long to respond. i had to find the bottle to check the name. i have used the franmar. i liked it since it confined the crud. no particles in the air from sanding. (although this time i plan to sand because one of the indianapolis alberg association members has a neat water partical collection unit i plan to borrow)
  i used lots of newspaper to catch the gunk. i thought it worked well. it was five years ago so the memory is not fresh. do read the label. it seems u cannot leave on more than 18 hours or some such because it will melt the fiberglass. think i had that problem on my rudder....had to go to a wedding or something, wrapped plasict wrap around area being stripped, left on too long. had to learn about fiberglassing.
  dan 

Elaine and Brian Timmins <timmins at optonline.net> wrote:
  Has any one on this list tried the Franmar Soy based "Soy Strip" marine 
paint remover or their "Soy Gel" paint remover? Any comments, likes, or 
dislikes? I'm thinking of using one of these products to remove the 
deteriorating varnish finish on my interior teak in preparation for 
refinishing.
Thanks for any comments,
Brian ex#497
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list


		
---------------------------------
New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.
 1144340741.0