[Public-list] slab reefing, boom vang
Gordon Laco
mainstay at csolve.net
Thu Apr 20 17:04:22 PDT 2006
Oh yeah, that was your original question. I guess I forgot about it while I
was pounding the table, spilling everybody's beer!
Yes, two reefs is common - if you look at the pictures of us reefing that
George has put on the US A30 website you will be able to get an idea of the
size of each reef. Sorry, I forget the exact measurements. I do recall
asking my sailmaker to make both reefs deep.
Re where to hang the vang on the boom... There is no rule of thumb there but
keep in mind that the loading on it will be terrific. I put ours somewhat
further along that boom than the boom is high above the step. If I were to
do again I would move it further out. I think you can see it in the same
pictures mentioned above.
Which reminds me - I sometimes look at that single bolt in the clew end of
the boom from which the mainsheet is hung, and wonder why I depend on it so
much. I will someday fit a formed stainless steel block hanger there
similar to the one I mounted for the vang.
Gord #426
> Bob and Gord,
>
> You're both right about jiffy reefing needing only two grommets for each
> reef and about the "in between" grommets (those between the tack and the
> clew grommets) being used only to tie in the bunt, with no load on them.
> That's how I reef the main on my present boat (a Tanzer 26). So, I agree
> that my mention of "rows of reef points" was misleading.
>
> Now, I am considering getting an Alberg 30 and I probably will want to go to
> slab reefing instead of the original roller reefing.
>
> Do you know if there are any guidelines about how high above the foot of the
> main the two grommets for each of the two reefs should be (I assume that two
> reefs is standard)?
>
> And do you know how far from the mast the boom vang should hook onto the
> boom to achieve maximum purchase?
>
> Thanks again,
>
> Bernard
>
>> Bernard,
>> For jiffy reefing you only need two grommets for each reef. (Your
>> mention of "the rows of reef points" sounds like the old method of
>> reefing that ties the foot of the sail at many points). Excuse me if i
>> misinterpreted your mention of "the rows of reef points" .
>>
>> Bob Johns, Wind Call #397
>
>
>> The only function of the grommets is to offer a place to loosely tie in the
>> bunt or unused reefed portion of the sail - there should be no load on them.
>>
>> Gord #426
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
1145577862.0
More information about the Public-List
mailing list