[Public-list] Fuel tank

[Bob Crinion]

Hi Mike,

Thanks for your reply.

Mirax Corp.
4999 Flyer Ave.
St. Louis, Missouri  63139

model AV 717
68 liter
18 Gal
wall thickness .090
lot 222
mfg. 5/86

This is some of the info you posted about your tank as well as the
measurements.
I'm wondering if it will fit my boat which is Hull # 560.

Do you know if the storage lockers are the same between pre-liner hulls and
Alberg 30's with hull liners?

To purchase a stock tank that would fit the starboard locker and be able to
use the same fuel filler fitting would be great!

Much thanks,

-bob

A30 #560
Email: bob at fox.nstn.ca


-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of Michael Grosh
Sent: April 25, 2006 8:34 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Fuel tank

Bob,

Tank is back in the boat, but I make the measurements to be 36"X17 1/2"X7 
1/4". The fill hole is 14 1/2" back from the forward end

I took a few pictures of the thing reinstalled, but I couldn't figure out 
how to find your e mail address. This list strips pictures, I'm not sure if 
it is worth the trouble to post them through George. The tank is remarkably 
un photogenic...

MichaelGrosh
#220 

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1146059285.0