[Public-list] reversing gear (A4)

[dickdurk at atlanticbb.net]

...Then you might want to invest $10-15.00 on a 
compression guage. I like the screw in kind myself. Actual 
numbers don't matter, but lowest reading should be within 
75% of the highest. Screws into the spark plug holes-don't 
lose track of which plug wire goes to which cylinder.

MichaelGrosh
#220

On Sun, 27 Aug 2006 20:53:44 -0400
  George Dinwiddie <gdinwiddie at alberg30.org> wrote:
> Patty J wrote:
>> I am having problems going into forward or reverse; the 
>>engine dies when
>> I try either.  Ifigure I need to adjust something in the 
>>reversing gear
>> box.  I can not find my good ole Moyer A4 book and was 
>>wondering if
>> anyone had some photos and directions?
> 
> Have you checked that your prop isn't fouled?  With the 
>transmission in 
> neutral, can you turn the shaft by hand?
> 
> -- 
>  ----------------------------------------------------------------------
>   When I remember bygone days 
>                        George Dinwiddie
>   I think how evening follows morn; 
>           gdinwiddie at alberg30.org
>   So many I loved were not yet dead, 
>          http://www.Alberg30.org
>   So many I love were not yet born.
>                'The Middle' by Ogden Nash
>  ----------------------------------------------------------------------
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list


 1156729462.0