[Public-list] Fw: Electric Bilge Pump Installation

[Jonathan Adams]

Mine is installed on a aluminum strut that extends to the bilge - this facilitates lifting it in and out. The strut is fastened at the top. I have not yet  had to take it out, but I have used this on other boats, and it saves having to be upside down for so long.
 
The outlet leads to a Y in the starboard locker, where it joins with the suction hose from a manual whale / diaphram pump. If you want to use the manual one, you flip the Y valve, and the reverse for the DC one.

JA
Laughing Gull

----- Original Message ----
From: John Boor <mahseer at kos.net>
To: Alberg 30 Public List -- open to all <public-list at alberg30.org>
Sent: Saturday, July 29, 2006 12:01:51 PM
Subject: Re: [Public-list] Fw: Electric Bilge Pump Installation


>> Has anyone installed an electric bilge pump in an Alberg 30  yet keeping
> the
>> manual one as back up?
>>
>> Could also use some help from anyone experienced in repairing a holding
> tank
>> in an Alberg 30 built in 197.
>>
>> Many thanks.
>>
>> John & Cathie
>> Scotch Mist II #448
>>
> John & Cathie

If your E-Mail address is canadian It is a coast guard requirement to have
a manual bilge pump installed and working, so keep the manual pump
installed.

john Boor
MAHSEER #380
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
 1154444654.0