[Public-list] Masthead Sheave

[Cole, Andrew L]

Mike,

Good point.  I pulled the measurements of a blueprint on the website
that shows a 1/2" hole.  There is another set of measurements in the
maintenance section that shows photos of an aluminum sheave with a
5/8ths hole, which is confirmed by your measurements.

Unless there is outcry, I will change the spec to 5/8 holes (this seems
to be the more-correct spec).  If there are any 1/2 inch bolts out
there, they could be retrofitted by just drilling out the hole 1/8
larger and replacing the bolt.

Andrew


>>Andrew,

>>I have 2 sheaves at home. 1. really old, phenolic, from and older A30,
and 
>>2. an aluminum sheave from hull #567. Both are original A30 sheaves.
Both 
>>are in reasonable condition. Both have 5/8" center holes without
showing any 
>>elongation from wear. Your specs are for .5" center holes. Given this,
I 
>>believe the center axel is 5/8". I still want 2 of the new ones, but
how did 
>>you come up with the .5" center hole? Can you double check that? All
of the 
>>other dimensions are good.



>>Mike Lehman
>>~~~_/)_/)~~_/)~~~  

Cole, Andrew L
Admitted in Maryland, Virginia & Florida
One Corporate Center
10451 Mill Run Circle, Suite 1000
Baltimore MD 21117

 
tel: 410 581-7408
fax: (410) 581-7410
mob: (410) 206-3577

--------------------------------------------------------
This message contains confidential information and is intended only for public-list at alberg30.org. If you are not public-list at alberg30.org you should not disseminate, distribute or copy this e-mail. Please notify andrew.cole at llff.com immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Cole, Andrew L therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
--------------------------------------------------------

 1154448429.0