[Public-list] Mast rake. Ventilation

[Elaine and Brian Timmins]

and the bottom of the bottom, and the joint in the middle need to angle down 
going aft to keep the rain out.
----- Original Message ----- 
From: <dickdurk at atlanticbb.net>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Tuesday, August 22, 2006 9:22 AM
Subject: Re: [Public-list] Mast rake. Ventilation


> Ed
>
> If you make the hatch boards, keep in mind the top one
> needs to be curved on top to match the sliding hatch.
>
> Don't ask how I know that.
>
> MichaelGrosh
> 220
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list 


 1156265758.0