[Public-list] dodger..LG - Correction

[Jonathan Adams]

CORRECTION - I paid in Canadian $

previous message =====================

JB,
 
I am away from home right now, but if my memory is correct, I paid about $1,200 CAN - at the time, I remember thinking this was around $900, but I would have to check - Maybe $1,300?
 
I got the simple dodger. The frame came with it, as well as all the fittings. I had to attach the frame to the deck, and also screw in the snaps. It is easy to take off if I want to sail without it. It came with pretty good instructions. However, I did call them up before starting to get some clarifications. It also came with the sipper for the dodger extension.
 
Jonathan



----- Original Message ----
From: J Bergquist <jbergqui at gmail.com>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Wednesday, December 27, 2006 12:45:26 PM
Subject: Re: [Public-list] dodger..LG


Jonathan-

I sent in a request for a quote to Genco last week but have not yet heard
back from them. Meanwhile I have been trying to get quotes and information
from other suppliers as well, including Iverson who has been very helpful.

Any chance you'd be willing to share with the group how much they charged
for your dodger? Did it come fully complete and ready for assembly or was
there much assembly required on your part?

Kind regards,

JB

On 12/25/06, Jonathan Adams <laughing_gull at verizon.net> wrote:
>
> All,
>
> I responded too early without reading the whole thread.
>
> The dodger that the folks at Genco marine made works well, and was
> reasonably priced versus what an Annapolis shop would charge. They are
> familiar with A30s, and therefore, it was easy to deal with them on the
> measurement front.
>
> http://www.gencomarine.com/dodgers/album.cfm
>
> I have documented my project - along with what I would do differently in
> terms of mail ordering here
>
> http://mysite.verizon.net/laughing_gull/id1.html
>
> I am curious as to whether anyone has any advice for a dodger extension.
> Where do you put the support poles?
>
> Jonathan
> 197
 1167486746.0