[Public-list] propellor shaft

[John Boor]

Been there done that my shaft broke at the engine flange and had to have a
new one built.  I used stainless for the replacement but now wish I had
spent the extra for bronze one.  No problems encounted since I sail in
fresh water.

John Boor
MAHSEER #380

> My Atomic 4 propellor shaft broke this summer and I'm wondering if
> there is a place to buy an off the shelf replacement. Or do I need to
> have a new one build at a machine shop? I'd love to hear from anyone
> who has gone through this already. The broken shaft appears to be
> bronze or brass. I can't find a serial number on it. I also have to
> replace my cutlass bearing.
> Mark Bisset,
> Wanderlove
> Penetanguishene, ON
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> public-list mailing list
> public-list at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


 1165336573.0