[Public-list] dodger..LG

[J Bergquist]

Jonathan-

I sent in a request for a quote to Genco last week but have not yet heard
back from them. Meanwhile I have been trying to get quotes and information
from other suppliers as well, including Iverson who has been very helpful.

Any chance you'd be willing to share with the group how much they charged
for your dodger? Did it come fully complete and ready for assembly or was
there much assembly required on your part?

Kind regards,

JB

On 12/25/06, Jonathan Adams <laughing_gull at verizon.net> wrote:
>
> All,
>
> I responded too early without reading the whole thread.
>
> The dodger that the folks at Genco marine made works well, and was
> reasonably priced versus what an Annapolis shop would charge. They are
> familiar with A30s, and therefore, it was easy to deal with them on the
> measurement front.
>
> http://www.gencomarine.com/dodgers/album.cfm
>
> I have documented my project - along with what I would do differently in
> terms of mail ordering here
>
> http://mysite.verizon.net/laughing_gull/id1.html
>
> I am curious as to whether anyone has any advice for a dodger extension.
> Where do you put the support poles?
>
> Jonathan
> 197
> ----- Original Message ----
> From: Jay Davenport <jay at saildriver.com>
> To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>;
> Alberg 30 Public List -- open to all <public-list at alberg30.org>
> Sent: Tuesday, December 19, 2006 10:53:43 AM
> Subject: Re: [Public-list] dodger
>
>
> These Iverson dodgers look very nice. Please let me know if you decide to
> get one, as I am also researching choices.
>
>   Jay Davenport
>   Revolution, A30 #526
>
> J Bergquist <jbergqui at gmail.com> wrote:
>   For those of you who have dodgers, where do the frames attach? On the
> sides
> of the house? On top of the house? On the deck? Or on the coaming?
>
> I am going to build a dodger, and I am in the process of measuring and
> designing it. I would like to know where other folks have attached their
> dodgers.
>
> I have been looking at these:
>
> http://www.iversonsdesign.com/dodgers.html
>
> Which are really sweet and seem to have nice design and features. I am
> hoping to replicate something like that.
>
> J Bergquist
> Calliope #287
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> public-list mailing list
> public-list at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> public-list mailing list
> public-list at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> public-list mailing list
> public-list at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1167241526.0