[Public-list] Dodger

[Bill Burke]

Hi JB,
I'm also looking into a dodger...  wonder if there's any possibility of a 
group discount if we submitted a few orders together?  I know there'd be 
some customizing but the basic dodgers should/could be the same...  Anyone 
else out there have a new dodger in their future?
Bill Burke
Osprey #116


> Jonathan-
>
> I sent in a request for a quote to Genco last week but have not yet heard
> back from them. Meanwhile I have been trying to get quotes and information
> from other suppliers as well, including Iverson who has been very helpful.
>
> Any chance you'd be willing to share with the group how much they charged
> for your dodger? Did it come fully complete and ready for assembly or was
> there much assembly required on your part?
>
> Kind regards,
>
> JB
>
> On 12/25/06, Jonathan Adams <laughing_gull at verizon.net> wrote:
>>
>> All,
>>
>> I responded too early without reading the whole thread.
>>
>> The dodger that the folks at Genco marine made works well, and was
>> reasonably priced versus what an Annapolis shop would charge. They are
>> familiar with A30s, and therefore, it was easy to deal with them on the
>> measurement front.
>>
>> http://www.gencomarine.com/dodgers/album.cfm
>>
>> I have documented my project - along with what I would do differently in
>> terms of mail ordering here
>>
>> http://mysite.verizon.net/laughing_gull/id1.html
>>
>> I am curious as to whether anyone has any advice for a dodger extension.
>> Where do you put the support poles?
>>
>> Jonathan
>> 197
>> ----- Original Message ----
>> From: Jay Davenport <jay at saildriver.com>
>> To: Alberg 30 Public List -- open to all 
>> <public-list at lists.alberg30.org>;
>> Alberg 30 Public List -- open to all <public-list at alberg30.org>
>> Sent: Tuesday, December 19, 2006 10:53:43 AM
>> Subject: Re: [Public-list] dodger
>>
>>
>> These Iverson dodgers look very nice. Please let me know if you decide to
>> get one, as I am also researching choices.
>>
>>   Jay Davenport
>>   Revolution, A30 #526
>>
>> J Bergquist <jbergqui at gmail.com> wrote:
>>   For those of you who have dodgers, where do the frames attach? On the
>> sides
>> of the house? On top of the house? On the deck? Or on the coaming?
>>
>> I am going to build a dodger, and I am in the process of measuring and
>> designing it. I would like to know where other folks have attached their
>> dodgers.
>>
>> I have been looking at these:
>>
>> http://www.iversonsdesign.com/dodgers.html
>>
>> Which are really sweet and seem to have nice design and features. I am
>> hoping to replicate something like that.
>>
>> J Bergquist
>> Calliope #287
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> public-list mailing list
>> public-list at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> public-list mailing list
>> public-list at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> public-list mailing list
>> public-list at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>
>
> ------------------------------
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> public-list mailing list
> public-list at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> End of public-list Digest, Vol 861, Issue 1
> *******************************************
> 



 1167277871.0