[Public-list] Stanchion Question

[Dave Terrell]

Garhauer has 24 " stainless tubes - one lifeline - for $27 and loose
change. Tops-in-Quality has them for $44. $48 for two lifelines. Top-in
quality will duplicate the base for $52/base. Their standard base does
not match our bolt pattern - or least my pattern.

>>> gdinwiddie at alberg30.org 01/04/06 7:33 PM >>>
FINNUS505 at aol.com wrote:
> Has anyone replaced individual stantions that were bent? Is there an  
> affordable source for stantions that match the originals?

I have.  I just used some stainless tubing (and reused the lifeline 
guide at the top).  Note that some of the stanchions are supposed to be 
bent in slightly just above the base.  This lets them stand up straight 
on a sloped deck, rather than leaning outboard.

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list


 1136428825.0