[Public-list] Stanchion Question

[Dave Terrell]

Thanks. Actually I have about 5 different kinds of "original" stanchions
on the boat. Lots of replacement in the past but no across the board
consistent change. Most of it is pretty tired.

>>> gdinwiddie at alberg30.org 01/05/06 6:56 PM >>>
Do you still have the original stanchion?  I found it pretty easy to 
drive out the top piece using a length of all-thread.  I then inserted 
it into a piece of stainless tubing and peened the tubing into the 
depressions of the top piece.

Dave Terrell wrote:
> when you got the tubing from on-line, how did make openings for the
life
> line in the tubing? the hole in the top .29 inches woudl be too small
> for my lifelines which are 5/16 (I think). If they were 1/4 they would
> slide through the hole on top with room to spare. Am I on the right
> track or missing something?

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                                             'The Middle' by Ogden Nash
  ----------------------------------------------------------------------



_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list


 1136510623.0