[Public-list] Adequate Inspection of Bronze fittings and SSChainplates

[Peter Amos]

----- Original Message ----- 
From: "Michael Connolly" <crufone at sbcglobal.net>
To: "Public List Alberg" <public-list at alberg30.org>
Sent: Thursday, July 13, 2006 5:16 PM
Subject: [Public-list] Adequate Inspection of Bronze fittings and 
SSChainplates
Michael,I wont comment on the turnbuckles,I know nothing about testing them.
Re the chainplates:I inspected mine a year or so ago.They were a disaster 
waiting to happen Holes were ovalised,there were cracks across holes and 
when I took out the 1/4" machine screws several of the heads fell off. I 
replaced the lot,new chainplates and 5/16" bolts.They are not too difficult 
to get at and inspect and the effort is well worthwhile.
Pete TaitTait #478
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.9.10/385 - Release Date: 11/07/2006
>
> 

 1152808621.0