[Public-list] Main Halyard Sheave Group Purchase

[Cole, Andrew L]

I am getting ready to place an order for delrin main halyard sheaves.
The sheave dimensions are taken from the website, and hopefully should
be an exact match for the original piece, 6.75" in diameter, .5" in
width, with a bronze bushing and a .5" axle pin hole.  The sheaves are
machined to take either wire or rope.  The manufacturer's website is
www.zephyrwerks.com.  The group pricing is as follows:

Qty 1 - $86 each
Qty 2 - $80 each
Qty 3 - $74 each
Qty 4 and up - $68 each
Shipping $12

I have at least two, including myself, and a possible third order.  If
anyone else is interested, please contact me as soon as possible, I will
probably place the order by mid-week.

Andrew Cole
Andante - 152  

Cole, Andrew L
Admitted in Maryland, Virginia & Florida
One Corporate Center
10451 Mill Run Circle, Suite 1000
Baltimore MD 21117

 
tel: 410 581-7408
fax: (410) 581-7410
mob: (410) 206-3577

--------------------------------------------------------
This message contains confidential information and is intended only for public-list at alberg30.org. If you are not public-list at alberg30.org you should not disseminate, distribute or copy this e-mail. Please notify andrew.cole at llff.com immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Cole, Andrew L therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
--------------------------------------------------------

 1154360933.0