[Public-list] Cockpit floor

Gordon Laco mainstay at csolve.net
Tue Mar 14 11:16:12 PST 2006


Thanks Andy - that does sound like what my friend uses.

How is Dove doing?

Gord







> I used a Roto-zip to remove my icebox and a few other things, worked great.
> Get the right "blade". They look like drill bits but there are different ones
> for different materials. The drywall bit will not do much for fiberglass, but
> I found the heavy duty bit even cut through the glass in places where it was
> 3/4" thick. Just take your time and be prepared to go through a few "blades".
> Another nice feature is that the tool has a hookup for a shop-vac to suck up
> most of that delicious fiberglass .
> Andy   #477
> 
> -- Mpete53 at aol.com wrote:
> Gord
> 
> Roto zip I believe is what you are thinking of.
> 
> I have not used that model but one similar and found that they work great  on
> sheet rock but not much more.
> 
> I have found that a Dremal Tool does better than I ever thought that it
> would. Try one of the abrasive cut off  disks. That should let you get  close
> to 
> the sides and into the corners.
> 
> Mark
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list


 1142363772.0


More information about the Public-List mailing list