[Public-list] Zincs

[FINNUS505 at aol.com]

Fellow Albergers,
 
The zinc on my prop shaft and the one I have remotely attached to the  
cutlass bearing housing by a copper strap decay noticeably faster than the other  
zincs on the bottom of Stargazer.
 
Anyone experience something similar?
 
At first, I assumed that indicated that I had some stray current going  
through the engine to the shaft.
 
Then I thought that those zincs might go fastest because they were attached  
to the largest pieces of metal protruding from the boat, namely, the prop,  
shaft, and cutlass bearing housing.
 
The other zincs I have are 1) for the rudder gudgeons, and 2) for  the rudder 
shoe.
 
Stargazer's thru hulls are marlon.
 
There is a fleet of fishing boats in New Bedford harbor that run their  
engines and generators all night, and so there is alot of stray current.
 
Any thoughts?
 
Thx,
Lee
Stargazer #255

 1143598719.0