[Public-list] Cockpit floor

[andymshaw at juno.com]

I used a Roto-zip to remove my icebox and a few other things, worked great. Get the right "blade". They look like drill bits but there are different ones for different materials. The drywall bit will not do much for fiberglass, but I found the heavy duty bit even cut through the glass in places where it was 3/4" thick. Just take your time and be prepared to go through a few "blades". Another nice feature is that the tool has a hookup for a shop-vac to suck up most of that delicious fiberglass .
Andy   #477

-- Mpete53 at aol.com wrote:
Gord
 
Roto zip I believe is what you are thinking of.
 
I have not used that model but one similar and found that they work great  on 
sheet rock but not much more.
 
I have found that a Dremal Tool does better than I ever thought that it  
would. Try one of the abrasive cut off  disks. That should let you get  close to 
the sides and into the corners.
 
Mark
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list


 1142363462.0