[Public-list] Filling Holes

[Meinhold, Michael J]

George - thanks - I was confused and thought we were laying FG over the
holes, not in them.
I'd love to leave it for Maintenance Weekend and have your help, but I have
to close it up before I launch.

Mike

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org]On Behalf Of George Dinwiddie
Sent: Tuesday, March 14, 2006 7:20 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Filling Holes


Meinhold, Michael J wrote:
> Thanks, George.
> 
> I would do this for any structural element that needed repair, but is it
> neccessary for filling the holes in the compass cutout?  I presume laying
up
> 3 layers of mat and cloth would raise the surface 1/4 inch or so, and it
> would be difficult to fair it out over such a small space.  Would epoxy
have
> any tendency to pop out of a hole like this?

It won't raise the surface.  You'll be putting the mat and cloth in the 
holes and on the bevel you grind, not on top of the finished surface.

The holes are too big to fill with an epoxy putty, and laying up epoxy 
laminates is a lot less forgiving than polyester.  It also means you can 
never do a polyester repair in that location, again.

I really don't understand why everyone wants to repair a polyester boat 
with epoxy.  Epoxy is not magic stuff.  It has some advantages over 
polyester (adhesiveness, more waterproof, fewer VOCs), but also some 
disadvantages (sensitivity to UV, sensitivity to mixing accuracy, 
sensitivity to application, sensitivity of my hand to the hardener).

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                'The Middle' by Ogden Nash
  ----------------------------------------------------------------------



_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list

 1142426155.0