[Public-list] replacing spreaders

[Jock McClees]

Tom, are you using it for exterior or interior  or both? I have used it
inside my Alberg and my Cal 36 and had no problems with it and it resists
mildew. Phil Beigel recommended it to me. Paul Miller ( not an A30 person)
recommended it to me for the spreaders because it can flex some. It would
seem like it would work for your application but I have no experience with
that type of application.
Jock
----- Original Message ----- 
From: "Tom S." <tom.s at insightbb.com>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Thursday, April 27, 2006 10:04 AM
Subject: Re: [Public-list] replacing spreaders


> Jock,  I concur with your spreader instructions. But would like to ask
> if you would also recommend  Easypoxy for my homebuilt wooden tender. I
> originally painted it with a white high gloss porch paint (Probably a
> bad choice) and it has developed a lot of small cracks in the paint. It
> consists mostly of 1/4 inch marine plywood, kind of a sailing pram plan
> with mahogany trim.
>
> Tom S
> A30  412
>
>
> Jock McClees wrote:
> > You can get the wood from
> > Exotic Lumber 1610 Whitehall Rd. 410-267-0887 or
> > Aircraft Spruce 877-477-7823 - ordered from them
> > Ask for spar grade or aircraft grade spruce
> > If you use another wood, make sure the grain is running in line with the
> > spreader and not at an angle.
> >
> > Use Epifanes Teak Woodfinish Gloss
> > 1st coat 50% thinned
> > 2nd coat 25% thinned
> > 5 more coats, no sanding if do within 24 hours
> > Or use Epifanes clear varnish with sanding per instructions on the can
> > Wait 4 days
> > Sand with 150 grit on top and sides
> > Use Easypoxy white undercoater on tops and sides
> > Then use Easypoxy white gloss on tops and sides
> > Don't use Allgrip (spelling?). It is brittle and it will deteriorate
faster
> > because of the flexing. The Easypoxy works better in this application
> > although Allgrip works better for other applications.
> >
> > Jock McClees
> >
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list


 1146535389.0