[Public-list] Kevlar

[Roger L. Kingsland]

Correction, it's "pulling boat" (as in sliding seat row boat) not "polling 
boat" (as in boat that hangs out outside places where people vote).


----- Original Message ----- 
From: "Roger L. Kingsland" <r.kingsland at ksba.com>
To: "Alberg30" <public-list at alberg30.org>
Sent: Wednesday, November 01, 2006 2:42 PM
Subject: [Public-list] Kevlar


> This is a non-Alberg 30 question but I figure someone in this a gust group 
> must know the answer.  I recently bought a 16 foot "polling boat" made of 
> Kevlar.  I would like to expand the built-in flotation compartments at 
> each end and don't know if standard fiberglass tape and epoxy will stick 
> to Kevlar or if I need some other stuff.  Any thoughts?
>
> Thanks, Roger
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
> 



 1162410366.0