[Public-list] A30 Jackstands

[Rod Symmes]

The July/Aug issue of Good Old Boat had an article on how to build a temporary cradle using lumber and how to custom fit it to an individual boat.  The only complication I can see for you is that the boat is lowered onto the main timbers and then the crane must support the boat for several hours while the final assembly is made against the shape of your hull.
Perhaps you can talk your crane operator to lift her onto the timbers at quitting time and come back for his crane in the morning........ good luck  (-:

Cheers,    Rod

~~~~ _/)~~~ _/)_/) ~~~~
~~~~~~~~~~~~~~
   ~~    ~~~~~    ~~~~

  ----- Original Message ----- 
  From: C.B. Currier 
  To: public-list at alberg30.org 
  Sent: Wednesday, October 18, 2006 3:11 PM
  Subject: [Public-list] A30 Jackstands


  Anyone have a lead on some Used Alberg 30 capable Jackstands.
  I want to pull Daybreak #458 and put her in the backyard. However I would
  need jackstands to accomplish this. I am in Annapolis.

  If no suggestions come I will go to one of the local boat yards.
  I might also entertain building a cradle. Is it worth the cost? Will it last?

  -- 
  C.B. Currier
  Infinity #57
  Daybreak #458


  _______________________________________________
  These businesses support your Association:
  http://www.alberg30.org/store/A30supporters.html
  Please support them.
  _______________________________________________
  Public-list mailing list
  Public-list at alberg30.org
  http://alberg30.org/mailman/listinfo/public-list

 1161263514.0